Diesel sulfur content testing equipment

Diesel Sulfur Content Testing Equipment Diesel Sulfur Content Testing Equipment Hebi Yinte Instrument and Meter Factory

Utilizing microcoulometric analysis technology, the sample is oxidized into titratable ions via a cracking furnace using the oxidation method, followed by titration in the titration cell. Based on the electricity consumed during the electrolytic titration process and in accordance with Faraday's law, the sulfur content in the sample is calculated. It is suitable for light petroleum products with boiling points ranging from 40 to 310°C. The sulfur content range for samples is 0.5 to 1000 ppm; samples exceeding 1000 ppm should be diluted before measurement. This instrument can also measure chlorine content.

Microcoulometric Sulfur and Chlorine Analyzer

Instrument Features

1. Direct human-machine dialogue, easy operation

2. Computer-controlled entire analysis and data processing process, displaying the full working status, with the option to save parameters and results to disk or print as needed

3. Uses internationally popular circuits and components, reducing instrument noise and improving detection sensitivity

4. Features stable and reliable performance, simple operation, high analysis accuracy, and good repeatability

Technical Parameters

Bias voltage range: 0 to 500 mV

Measurement range: 0.1 to 10000 ng/μl

Temperature control range: Room temperature to 1000°C

Temperature control accuracy: ±1°C

Measurement accuracy:

Sample concentration (ng/μl) 0.2   RSD(%) 35

Sample concentration (ng/μl) 1.0   RSD(%) 10

Sample concentration (ng/μl) 100   RSD(%) 5

Sample concentration (ng/μl) 1000   RSD(%) 2

Gas source requirements: Ordinary nitrogen and ordinary oxygen

Power supply voltage: AC 220V ±10%, 50Hz ±10%

Power: 3.5 kW

Dimensions: Main unit: 410 × 350 × 75 (mm)

Temperature controller: 530 × 420 × 360 (mm)

Stirrer: 290 × 270 × 360 (mm)